APRILIA RSV4 Specification and Picture:Technical Specifications
Engine Aprilia 65° cc longitudinal V-four four stroke. Liquid cooled. Double overhead camshaft; four valves per cylinder.
Bore and stroke 78 x 52.3 mm.
Displacement 998.9cc
Compression ratio 12.8:1
Max. power at crank 180 HP (132 kW) at 12,500 rpm
Max. torque at crank 115 Nm at 10,000 rpm
Fuel system Variable height intake trumpets. Airbox with aerodynamic side intakes. 4 throttle bodes, 8 injectors, ride-by-wire fuel management. Multimapping
Ignition Electronic digital ignition integrated in the fuel management system.
Exhaust 4 into 2 into 1. Lambda probe oxygen sensor. Single lateral silencer. Integrated exhaust valve and catalytic converter. (Euro 3.)
Lubrication Wet sump. Two pumps (lubrication and cooling). Oil cooler.
Gearbox 6 speed cassette type.
Clutch Multi-plate wet clutch with slipper device.
Frame Twin beam aluminium frame with mixed cast and pressed sheet sections. Adjustments for: headstock position and angle, engine height, swingarm pivot height.
Front suspension Öhlins 43 mm upside-down fork. Lower fork bottoms for radial calipers. Adjustment for preload, compression and rebound.
Rear suspension Double arch aluminium swingarm; mixed thin-wall casting and pressed sheet construction. Öhlins monoshock with piggy-back cylinder. Adjustments for compression, rebound, spring preload and length. APS rising rate linkages.
Front brake Double 320 mm lightweight stainless steel floating discs. Brembo monobloc radial calipers with 4 opposed pistons. Sintered pads. Radial master cylinder. Metal braided brake line.
Rear brake 220 mm disc. Brembo floating caliper with 2 insulated pistons. Sintered pads. Master cylinder with integral reservoir. Metal braided brake line.
Wheels Forged aluminium alloy. Front: 3.5”x17” - Rear: 6”x17”.
Tyres Radial tubeless; 120/70 ZR 17 (front) and 190/55 ZR 17 (rear).
Overall length: 2,050 mm
Overall width: 715 mm (at handlebars)
Overall height: 1,165 mm
Wheelbase: 1,424 mm
Dry weight 179 Kg.
Fuel tank 17 litres.
